Spikes Worx Landroid S/M/M+

A set of spikes (one for each wheel) which are mounted either inside/outside the wheels. This ensures, among other things, that the robot has a better grip on the surface and achieves a higher torque when it moves around. Screws and manual are included.

Description
Thick 3mm stainless acid-proof steel. Thanks to the improved grip, the robotic lawnmower can also perform its work on difficult terrain and in wet weather. Another advantage is that when the spikes penetrate the ground, the lawn is aerated at the same time!
Assembly is quick and easy. The spikes are aligned in the middle and screwed onto the existing wheel with the supplied countersunk screws.
The product is delivered in the naturally metallic shade.
Compatible with Worx Landroid S / M / M+ models
Check the dimensions!

Dimensions

Outside diameter (outer edge of teeth) = 220 mm

Note!
The Worx M+ robot has a design where there is extra plastic around one wheel compared to the other. Therefore, on this model, it is necessary to make a 5mm indentation in the plastic around the right wheel, so that there is room for the spikes to run around - There is no problem on the left wheel.
A guide to this can be found here

Advantage
* Easy to assemble: Put on ➡️ adjust ➡️ screw on ➡️ finished work
* More traction and grip even on wet or difficult terrain
* Wheel change possible without removing the spikes
* No protruding screws - this is often seen on similar products!