Spikes Worx Landroid S/M/M+
Spikes Worx Landroid S/M/M+
A set of spikes (one for each wheel) which are mounted either inside/outside the wheels. This ensures, among other things, that the robot has a better grip on the surface and achieves a higher torque when it moves around. Screws and manual are included.
Description
Thick 3mm stainless acid-proof steel. Thanks to the improved grip, the robotic lawnmower can also perform its work on difficult terrain and in wet weather. Another advantage is that when the spikes penetrate the ground, the lawn is aerated at the same time!
Assembly is quick and easy. The spikes are aligned in the middle and screwed onto the existing wheel with the supplied countersunk screws.
The product is delivered in the naturally metallic shade.
Compatible with Worx Landroid S / M / M+ models
Check the dimensions!
Dimensions
Outside diameter (outer edge of teeth) |
|
Inner diameter
|
165 mm
|
Screw to screw diameter | 174 mm |
Wheel diameter
|
185 mm |
Note!
The Worx M+ robot has a design where there is extra plastic around one wheel compared to the other. Therefore, on this model, it is necessary to make a 5mm indentation in the plastic around the right wheel, so that there is room for the spikes to run around - There is no problem on the left wheel.
A guide to this can be found here
Advantage
* Easy to assemble: Put on ➡️ adjust ➡️ screw on ➡️ finished work
* More traction and grip even on wet or difficult terrain
* Wheel change possible without removing the spikes
* No protruding screws - this is often seen on similar products!
Del
De virker
Herligt at se at andre har tænkt samme tanke ... mon der er nogen der laver spikes, til ens robot.
Og det var der sørme - dejligt.
Tak :-)
Helt fint Dem jeg købte til min worx kunne godt være lige lidt mindre
Helt fint Dem jeg købte til min worx kunne godt være lige lidt mindre
Super super Butik hurtig levering